UL listed Emergency Ballast for fluorescent lightings

UL listed Emergency Ballast for fluorescent lightings 1, 90 mins 2, life time of module: 5 years 3. IP20

Application

·For emergency operation of Fluorescent  lamps. For normal operation must be used a separate AC ballast. See instruction manual for further details;

·Start up time of normal operation is max. 5 seconds, also at low battery level. Start up time of emergency operation is max. 0.5 second;

·A LED signal lamp is lit when the module is in normal operation and is switched off when the lamp is in emergency operation;

·At normal surrounding temperature (from 0 Cº to 40 Cº), the charging time of the battery pack from 0%- to 100% is max. 24 hours. The discharging time is min.90 minutes;

·At permanent temperatures in the surrounding of above 40 Cº and max. 55 Cº the charging time can be increased with up to 100% and the discharging time can be reduced.

·Emergency operate one lamp minimum 90 minutes at reduced light output;

·Battery pack is integrated with the emergency module.

·Installation according to the instruction manual;

·The module is IP20. In outdoor use or in surroundings with dust or moist, the fixture must be sufficiently IP-rated. No moisture or condensation must enter the module;

Technical Data
Mains supply	120V or 277V, 50/60Hz
Tolerance of mains supply	108-132V or 250V-305V
Input Wattage	2.5W
Max. Input current	0.12A
Max. Charging current	110mA
Battery Rating	1.8Ah,4.8V (1.2V x 4PCS) Nicd battery SC type, 8.6WH
Initial Lumen Output	500LM
Ballast Lumen factor	17/18W: approx.18%, 32/36W: approx. 15%
Lamps operated	Most 2'-4' single, bipin T8 and T12, compact, HO or VHO fluorescent lamps
Emergency operation	90
Charging cycles	500
Life time for battery pack	5 years
Operation time for module	30,000 hours
Switching cycles for module	20,000 times
Life time of module	5 years
Compliant standards	UL 924
Approval	UL Listed
Mounting Measurement:	L242(230) x H27 x W52 mm
At normal surrounding temperatures (from 0 Cº to 40 Cº)

ADVANTAGE 

1)Design

Phenix has acquired sound market knowledge and planning capabilities. We have also built up strong R&D and design management systems. Moreover, our team boasts of enthusiastic, experienced people specialized in product development ranging from the structure to the electrical circuit

2)Techniques

"Face Light" achieves not only perfect uniform illuminated surface but also excellent luminous efficiency, the measured efficiency is over 50Lm/W.

3)OUR SERVICE

Phenix supplies quality, comfortable, safe products favored by up-market customers. We strive to create maximum value for our customers and our staff by constantly innovating diversified products and services.

FACTORY VIEWS AND CERTIFICATIONS

UL listed Emergency Ballast for fluorescent lightings